Bodyboard Finger Grips | 3 Piece | Retro
High performance brushed bodyboard finger grips
1 x 3 piece set
Applies to both HDPE & Surlyn slicks
£23.00
Buy now, pay later with
Pay in 4 interest free instalments with
Can’t find what you are looking for? Need help with sizing? Contact us.
When you order a SurfDek product we manufacture it specifically for you the same day. We love creating these brand new products for our customers but please contact us if you have any questions regarding fitting or sizing. We are conscious manufacturers and we can all benefit from only producing what is required. Let’s aim together to try and reduce the occurrence of having to exchange products for this reason.
Buy With Confidence
- FREE Tracked Shipping (UK + IRE) on orders over £100
- Worldwide Shipping Options Available
- Fast Dispatch
- FREE Stickers With Every SurfDek Order
- 100% Safe & Secure
You may also like…
Description
Customise your grip on the under side of your bodyboard, on the nose of the slick. Super comfortable 5mm grips, ridiculously grippy when wet.
High performance brushed bodyboarding finger grips, created using 5mm RTM-22™.
RTM-22™ is a new brushed foam formula, meaning no diamonds or pyramids. This creates an even better board feel whilst still maximising grip.
1 x 3 piece set (right, left and centre bar).
Applies to both HDPE & Surlyn slicks.
Works with contoured shapes such as slick bulbs.
Super lightweight – 12g
Exclusively made in the UK.
How To Apply SurfDek
In order to get a perfect adhesion to your board using our traction pads, we recommend you follow these steps listed below.
1. Warm Environment
We love being outside as much as anyone, but please Install SurfDek traction pads in a warm environment (like a cosy living room) above 18 degrees cesius. for an even better bond, use a hairdryer to gently warm up the back of the traction pad before you remove the backing film and apply.
2. Clean Flat Surface
Clean the board area with an alcohol wipe or similar. Make sure there is no wax residue, grease or dirt present before applying a surfdek traction pad. Be careful not to attempt to stick traction pads too far around board rails.
3. Peel and Stick
Peel back half of the adhesive backing of your traction pad, this will make it easier to align. Place the pad glue side down in the desired position, pressing firmy. peel the remaining backing from the traction pad and press into place. Once down, rub overt the traction pad firmly across the entire pad, making sure to rub your hand along the edges to make sure it is firmly in place.
Extra: Hex Pad Packs
Layout your Hex Pads across the area you wish to cover in order to make sure it will be a nice fit. You will find the y-tool included with the pack fits neatly into the edge of a Hex Pad, in order to align the next hexagon. So that the tool does not get stuck between traction pads, You can then pull the y-tool away from the pads before moving on to the next one. Repeat this process with each Hex Pad until you have completed your Hex Pad traction pad.
Get creative!
Additional information
Weight | N/A |
---|---|
Collection | |
Choose A Colour | Black, Canary Yellow, Candy Red, Chalk, Coral Pink, Gunmetal Grey, Heather Grey, Ocean Blue, Sand, Teak, Tiger Orange, Toxic Green |
Manufacture | Made In The UK |
Material | RTM-22™ |
Pieces | |
Traction | |
Surfboard Type | |
Watersport |
Reviews
There are no reviews yet.