SurfDek Pro Full Deck Pad | One Size | 9 Piece
30mm 4D vert kick for maximum grip and drive
Made with RTM-22™
High performance brushed 9 piece tail pad
SurfDek Pro Trim
£249.00
Buy now, pay later with
Pay in 4 interest free instalments with
Can’t find what you are looking for? Need help with sizing? Contact us.
When you order a SurfDek product we manufacture it specifically for you the same day. We love creating these brand new products for our customers but please contact us if you have any questions regarding fitting or sizing. We are conscious manufacturers and we can all benefit from only producing what is required. Let’s aim together to try and reduce the occurrence of having to exchange products for this reason.
Buy With Confidence
- FREE Tracked Shipping (UK + IRE) on orders over £100
- Worldwide Shipping Options Available
- Fast Dispatch
- FREE Stickers With Every SurfDek Order
- 100% Safe & Secure
You may also like…
Description
9 Piece Full Deck Pad – SurfDek Pro Trim
Classic shape for surfboards or kite boards, progressive performance.
Our tail pads are made with RTM-22™ traction and feature a signature 4D flex kick (30mm) manufactured from MG-Matrix-40™. These feature a 45 degree incline (20mm) to vert (10mm) for maximum grip and drive through turns. These kick tails use a contrast in materials to allow for comfort under your foot along with maximum grip against the vertical wall section of the tail pad, during turns or airs.
RTM-22™ is a new brushed foam formula, meaning no diamonds or pyramids. This creates an even better board feel whilst still maximising grip. MG-Matrix-40™ is a polymer created by SurfDek specifically for the purpose of surfboard traction pads.
3M® high-grade adhesive.
Manufactured in the UK using premium marine-grade foam, polymers and adhesives.
No arch
Lightweight
Foot strap insert holes through centre
Tail pad – 5mm thick x 340mm long x 330mm wide
Mid section – 5mm x 290mm long x 390mm wide
Front section – 5mm x 430mm long x 400mm wide
Overall measurements – 1060mm long
How To Apply SurfDek
In order to get a perfect adhesion to your board using our traction pads, we recommend you follow these steps listed below.
1. Warm Environment
We love being outside as much as anyone, but please Install SurfDek traction pads in a warm environment (like a cosy living room) above 18 degrees cesius. for an even better bond, use a hairdryer to gently warm up the back of the traction pad before you remove the backing film and apply.
2. Clean Flat Surface
Clean the board area with an alcohol wipe or similar. Make sure there is no wax residue, grease or dirt present before applying a surfdek traction pad. Be careful not to attempt to stick traction pads too far around board rails.
3. Peel and Stick
Peel back half of the adhesive backing of your traction pad, this will make it easier to align. Place the pad glue side down in the desired position, pressing firmy. peel the remaining backing from the traction pad and press into place. Once down, rub overt the traction pad firmly across the entire pad, making sure to rub your hand along the edges to make sure it is firmly in place.
Extra: Hex Pad Packs
Layout your Hex Pads across the area you wish to cover in order to make sure it will be a nice fit. You will find the y-tool included with the pack fits neatly into the edge of a Hex Pad, in order to align the next hexagon. So that the tool does not get stuck between traction pads, You can then pull the y-tool away from the pads before moving on to the next one. Repeat this process with each Hex Pad until you have completed your Hex Pad traction pad.
Get creative!
Additional information
| Choose A Colour | Canary Yellow, Candy Red, Coral Pink, Gunmetal Grey, Heather Grey, Ocean Blue, Sand, Teak, Tiger Orange, Toxic Green |
|---|---|
| Kick Tail | |
| Material | MG-Matrix-40™, RTM-22™ |
| Pieces | |
| Traction | |
| Surfboard Type | |
| Watersport | Kitesurfing, Surf Foiling, Surfing, Wake Skate, Wing Foiling |
| Collection | |
| Manufacture | Made In The UK |
A Gratwick –
They are grippy, comfy and i can't recommend them enough.
They are grippy, comfy and i can't recommend them enough. A fab company and have a great product. I have a few sets for surfboards with our company logo on.