Hydrofoil Traction Pad | Small | 9 Piece

SurfDek

For boards 5’2” and smaller
Small / W = 430mm L = 900mm
30mm 4D vert kick for maximum grip and drive
Made with RTM-22™
High performance brushed 9 piece wide hydrofoil traction pad

£121.00

We can personalise this for you with a name or custom text. Great for a individuals or businesses providing a unique touch or a gift for someone else. Our designers will add this text in the perfect position for you. Case and spacing sensitive: wE WiLL MaNufActure ExaCtlY How yoU eNter tHe TexT [*max 24 characters]
Get it fast! Usually dispatched within 48 hours

Buy now, pay later with

Pay in 4 interest free instalments with

Can’t find what you are looking for? Need help with sizing? Contact us.

When you order a SurfDek product we manufacture it specifically for you the same day. We love creating these brand new products for our customers but please contact us if you have any questions regarding fitting or sizing. We are conscious manufacturers and we can all benefit from only producing what is required. Let’s aim together to try and reduce the occurrence of having to exchange products for this reason.

Buy With Confidence

  • Done FREE Tracked Shipping (UK + IRE) on orders over £100
  • Done Worldwide Shipping Options Available
  • Done Fast Dispatch
  • Done FREE Stickers With Every SurfDek Order
  • Done 100% Safe & Secure
Secure Card Payments
  • Stripe
  • Visa Card
  • MasterCard
  • American Express
GTIN: 506100246 SKU: SD-WFPA Category: Tags: , , , ,

You may also like…

Description

Classic shape for foil boards, wake surf and skimboards. Progressive performance.

Provides complete traction coverage for your foil board, eliminating wax mess and providing even greater traction. Includes tail pad, front pad + connector centre pad. The difference in between our Small – Medium – Large sets is size of the centre pads.

Sizes available to cover:
Small / W = 430mm L = 900mm | Boards 5’2” and smaller
Medium / W = 430mm L = 1020mm | Boards from 5’2” — 5’10
Large / W = 430mm L = 1170mm | Boards 5’10” and bigger

Our tail pads are made with RTM-22™ traction and feature a signature 4D flex kick (30mm) manufactured from MG-Matrix-40™. These feature a 45 degree incline (20mm) to vert (10mm) for maximum grip and drive through turns. These kick tails use a contrast in materials to allow for comfort under your foot along with maximum grip against the vertical wall section of the tail pad, during turns or airs.

RTM-22™ is a new brushed foam formula, meaning no diamonds or pyramids. This creates an even better board feel whilst still maximising grip. MG-Matrix-40™ is a polymer created by SurfDek specifically for the purpose of surfboard traction pads.

3M® high-grade adhesive.

Manufactured in the UK using premium marine-grade foam, polymers and adhesives.

No arch

Lightweight

Foot strap insert holes through centre

How To Apply SurfDek

In order to get a perfect adhesion to your board using our traction pads, we recommend you follow these steps listed below.

1. Warm Environment

We love being outside as much as anyone, but please Install SurfDek traction pads in a warm environment (like a cosy living room) above 18 degrees cesius. for an even better bond, use a hairdryer to gently warm up the back of the traction pad before you remove the backing film and apply.

2. Clean Flat Surface

Clean the board area with an alcohol wipe or similar. Make sure there is no wax residue, grease or dirt present before applying a surfdek traction pad. Be careful not to attempt to stick traction pads too far around board rails.

3. Peel and Stick

Peel back half of the adhesive backing of your traction pad, this will make it easier to align. Place the pad glue side down in the desired position, pressing firmy. peel the remaining backing from the traction pad and press into place. Once down, rub overt the traction pad firmly across the entire pad, making sure to rub your hand along the edges to make sure it is firmly in place.

Extra: Hex Pad Packs

Layout your Hex Pads across the area you wish to cover in order to make sure it will be a nice fit. You will find the y-tool included with the pack fits neatly into the edge of a Hex Pad, in order to align the next hexagon. So that the tool does not get stuck between traction pads, You can then pull the y-tool away from the pads before moving on to the next one. Repeat this process with each Hex Pad until you have completed your Hex Pad traction pad.

Get creative!

Additional information

Collection

Choose A Colour

, , , , , , , , ,

Kick Tail

Manufacture

Made In The UK

Material

MG-Matrix-40™, Nylon, RTM-22™

Pieces

Traction

, , , , , ,

Surfboard Type

, , ,

Watersport

, , , , , , , , , , ,

Reviews

There are no reviews yet.

Be the first to review “Hydrofoil Traction Pad | Small | 9 Piece”

Your email address will not be published. Required fields are marked *